
Citadel Poly Flex UV Semi-Rigid Joint Filler
Joint Maintenance and Structure Repair
Citadel Poly Flex UV is a two-component, rapid-curing, 1:1 ratio, self-leveling, semi-rigid system that provides excellent flexibility, elongation, and resistance to degradation from UV-light exposure. This product will cure at temperatures down to -20 °F (-29 °C). Apply Poly Flex UV using a 1:1 dua
- In stock locally in Oak Forest, IL
- Technical support from experienced installers
- Pickup at our Oak Forest warehouse
Product Details
Citadel Poly Flex UV is a two-component, rapid-curing, 1:1 ratio, self-leveling, semi-rigid system that provides excellent flexibility, elongation, and resistance to degradation from UV-light exposure. This product will cure at temperatures down to -20 °F (-29 °C). Apply Poly Flex UV using a 1:1 dual-component caulk gun; over-filled joints can be shaved flush 1-24 hours after placement.
Recommended Uses
- Filling expansion joints in concrete that has exposure to sun.
Data sheets and application help
Ask us for the technical data sheet (TDS), safety data sheet (SDS) or application instructions, or call 708-629-0825 to talk through your job.
WARNING: This product can expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. See www.P65Warnings.ca.gov.
Why Contractors Use It
- Holds up against UV exposure better than standard joint fillers
- Fast set: light traffic in 1 hour, heavy traffic in 2 hours
- Generous 1-24 hour window to shave joints flush
- Cures in temperatures as low as -20°F
- Won't foam or bubble on damp joints and is less moisture-sensitive than other polyurea fillers
Where to Use It
- Interior control joints and new-construction saw cuts on horizontal concrete
- Industrial floors carrying heavy vehicle traffic
- Joints exposed to sunlight (exterior use possible, though constant UV may discolor it)
How to Apply
- Clean joints of dust, debris and oil; re-cut with a dry diamond blade; joints must be clean and dry, at least twice as deep as wide (minimum 1/2 in.)
- No primer needed; do not use backer rod (fill full depth for load transfer; dry silica sand may plug the bottom)
- Shake the cartridge, attach the static mixer, and purge until mix is uniform, keeping it pointed up during setup
- Dispense with a 1:1 dual-component caulk gun, slightly overfilling the joint
- Shave flush from about 1 hour up to 24 hours after placement; do not coat over it
Coverage & Cure
- Coverage
- Approximately 40 in³ per cartridge (655 cm³); e.g. 1/4" wide x 1" deep joint = 13 ft per 22 oz. cartridge (full table on TDS)
- Cure and recoat
- Gel time 25-30 seconds; tack free 3-4 minutes; shave window 1-24 hours; light traffic 1 hour; heavy traffic 2 hours (at 70-80°F / 50% RH)
- Packaging
- 22 oz. dual cartridge (SKU 384525); replacement static mixer nozzles, 3 per pack (SKU 257397)
From the manufacturer’s published data (source 1, source 2). Always follow the current technical data sheet; ask us for the TDS and SDS.
Watch It Applied

Video coming soon
Mixing and application video for Poly-Flex UV. Want to see it in person? It is part of our contractor training.
What Contractors Say About ECM
Ed and his son Matt are phenomenal. The product they sell is top notch and they truly know their craft. Between the great tech help and the great prices this business is the best. I’ve used most coating supply companies in the area over the years and have finally found my forever supplier.
Poly-Flex UV Questions
Where can I buy Poly-Flex UV near Chicago?
Elite Coatings Midwest stocks Citadel Poly Flex UV Semi-Rigid Joint Filler at 16410 Kilbourn Ave in Oak Forest, IL, in Chicago’s south suburbs, for pickup. Call 708-629-0825 or request pricing online.
What is Poly-Flex UV used for?
Interior control joints and new-construction saw cuts on horizontal concrete; Industrial floors carrying heavy vehicle traffic; Joints exposed to sunlight (exterior use possible, though constant UV may discolor it).
What is the coverage rate of Poly-Flex UV?
Approximately 40 in³ per cartridge (655 cm³); e.g. 1/4" wide x 1" deep joint = 13 ft per 22 oz. cartridge (full table on TDS) (manufacturer’s figure; actual coverage depends on the surface and how it is applied).
How long does Poly-Flex UV take to cure?
Gel time 25-30 seconds; tack free 3-4 minutes; shave window 1-24 hours; light traffic 1 hour; heavy traffic 2 hours (at 70-80°F / 50% RH) (manufacturer’s figures; times vary with temperature and humidity).



