16410 Kilbourn Ave, Oak Forest, IL · Get directions 708-629-0825 info@elitecoatingsmidwest.com
ARDEX K 301 Exterior Self-Leveling Concrete Topping
ARDEX

ARDEX K 301 Exterior Self-Leveling Concrete Topping

Self-Leveling Underlayments

ARDEX K 301 Exterior Self-Leveling Concrete Topping is a self-leveling topping and underlayment for fast-track resurfacing and smoothing for exterior and interior applications over concrete and approved, properly prepared, non-porous surfaces, including terrazzo, epoxy coatings and ceramic and quarr

Size
50lb

Price

Call or request today's price

  • In stock locally in Oak Forest, IL
  • Technical support from experienced installers
  • Pickup at our Oak Forest warehouse

Product Details

ARDEX K 301 Exterior Self-Leveling Concrete Topping is a self-leveling topping and underlayment for fast-track resurfacing and smoothing for exterior and interior applications over concrete and approved, properly prepared, non-porous surfaces, including terrazzo, epoxy coatings and ceramic and quarry tile – on, above or below grade.

Key Features

  • A blend of Portland cements and other hydraulic cements
  • Smooth new or existing concrete and approved non-porous surfaces
  • Install from 1/4″ – 3/4″ (6 – 19 mm) neat and up to 2” (5 cm) with aggregate
  • Walk on in 2 to 3 hours
  • Freeze-thaw resistant
  • Suitable for use in wet areas
  • For commercial, light industrial and residential applications
  • Use for exterior and interior applications
  • Suitable for use under the ARDEX MC Moisture Control Systems
  • Can be used as an underlayment prior to installing floor covering

Data sheets and application help

Ask us for the technical data sheet (TDS), safety data sheet (SDS) or application instructions, or call 708-629-0825 to talk through your job.

Why Contractors Use It

  • Self-leveling topping that resurfaces concrete quickly, inside or out
  • Freeze-thaw resistant and suitable for wet areas
  • Installs 1/4"-3/4" neat and up to 2" with added aggregate
  • Works for commercial, light industrial and residential projects
  • Can serve as an underlayment before floor covering; zero VOC

Where to Use It

  • Smoothing new or existing concrete, interior or exterior, on any grade level
  • Resurfacing approved non-porous surfaces such as tile, terrazzo and epoxy coatings
  • Areas with foot traffic and moderate rubber-wheeled forklift traffic
  • Under ARDEX MC RAPID moisture control

How to Apply

  1. Mechanically prepare concrete to CSP 3-5; abrade approved non-porous surfaces; vacuum thoroughly
  2. Prime with ARDEX EP 2000 or ARDEX MC RAPID and broadcast sand to refusal (or install ARDEX MC RAPID for moisture control)
  3. Mix two bags at a time, 5 quarts (4.75 L) of clean water per 50 lb bag, with a 1/2" drill for 2-3 minutes; do not overwater
  4. Pour, spread with the spreader, and immediately smooth or spike-roll, working continuously
  5. Seal or coat with a product suited to the service conditions once dried

Coverage & Cure

Coverage
Per bag: 23 sq. ft. at 1/4" (2.1 m² at 6 mm); 12.5 sq. ft. at 1/2" (1.2 m² at 12 mm), dependent on surface profile, density and porosity
Cure and recoat
Flow time 10 minutes (70°F). Walk on in 2-3 hours. Waterborne sealer ≤ 20 mils: once hardened and uniform in tone, min. 24 hours; solvent-borne / 100% solids ≤ 20 mils: 48-72 hours; coatings over 20 mils or high-build: 7 days.
Packaging
50 lb (22.7 kg) bag

From the manufacturer’s published data (source 1, source 2). Always follow the current technical data sheet; ask us for the TDS and SDS.

Watch It Applied

What Contractors Say About ECM

5.0 on Google · 149 reviews

Ed and his son Matt are phenomenal. The product they sell is top notch and they truly know their craft. Between the great tech help and the great prices this business is the best. I’ve used most coating supply companies in the area over the years and have finally found my forever supplier.
Richard Pollard

K301 Questions

Where can I buy K301 near Chicago?

Elite Coatings Midwest stocks ARDEX K 301 Exterior Self-Leveling Concrete Topping at 16410 Kilbourn Ave in Oak Forest, IL, in Chicago’s south suburbs, for pickup. Call 708-629-0825 or request pricing online.

What is K301 used for?

Smoothing new or existing concrete, interior or exterior, on any grade level; Resurfacing approved non-porous surfaces such as tile, terrazzo and epoxy coatings; Areas with foot traffic and moderate rubber-wheeled forklift traffic; Under ARDEX MC RAPID moisture control.

What is the coverage rate of K301?

Per bag: 23 sq. ft. at 1/4" (2.1 m² at 6 mm); 12.5 sq. ft. at 1/2" (1.2 m² at 12 mm), dependent on surface profile, density and porosity (manufacturer’s figure; actual coverage depends on the surface and how it is applied).

How long does K301 take to cure?

Flow time 10 minutes (70°F). Walk on in 2-3 hours. Waterborne sealer ≤ 20 mils: once hardened and uniform in tone, min. 24 hours; solvent-borne / 100% solids ≤ 20 mils: 48-72 hours; coatings over 20 mils or high-build: 7 days. (manufacturer’s figures; times vary with temperature and humidity).

Call Get Pricing

Get Pricing

Tell us what you need. We reply with today's price, usually the same business day.

Or call 708-629-0825