
ARDEX CP Concrete Patch & Repair Topping
Structural & Concrete Repair
ARDEX CP is a trowel-grade, cementitious topping for filling and repairing areas of indoor and outdoor concrete above, on or below grade.
- In stock locally in Oak Forest, IL
- Technical support from experienced installers
- Pickup at our Oak Forest warehouse
Product Details
ARDEX CP is a trowel-grade, cementitious topping for filling and repairing areas of indoor and outdoor concrete above, on or below grade.
Key Features
- Portland cement-based concrete patch and fill
- Repair, re-slope and re-form all concrete surfaces
- Easy to apply and hardens quickly
- Installs from 1/4″ to 1/2″ (6 to 12 mm) neat, and up to 2″ (5 cm) with aggregate
- Freeze-thaw resistant
- Suitable for foot and rubber tire traffic
- Suitable for commercial and residential applications
- Use for interior and exterior floors and walls
Data sheets and application help
Ask us for the technical data sheet (TDS), safety data sheet (SDS) or application instructions, or call 708-629-0825 to talk through your job.
Why Contractors Use It
- Repairs, re-slopes and re-forms concrete, horizontal or vertical
- Freeze-thaw resistant, for interior and exterior use on any grade level
- Sets quickly and is light-foot-traffic ready in about 2 hours
- Finished surface handles foot and rubber-tire traffic
- Can be extended with pea gravel for deeper repairs up to 2"
Where to Use It
- Filling spalls, gouges, dormant cracks and birdbaths in existing concrete
- Re-forming concrete steps and curbs, and building ramps
- Sidewalks, driveways, patios, pool decks, plazas, walkways and parking garages
- Not for submerged areas (pools, fountains) or heavy truck traffic
How to Apply
- Saw-cut repair areas into rectangles at least 1/4" deep and chip out to that depth
- Mechanically prepare to an exposed-aggregate profile (approx. CSP 5), then vacuum thoroughly
- Mix 5 quarts (4.75 L) of clean water per 40 lb bag (or 2.75 parts powder to 1 part water by volume) with a 1/2" drill for 2-3 minutes; do not overwater
- Work a scrub coat into the concrete with a steel trowel, then place the lift while the scrub coat is still wet
- Float the lift, screed to match surrounding elevation, and steel-trowel to the final finish after initial set
- Seal with a waterborne, breathable sealer (or resurface with ARDEX CD for a uniform look)
Coverage & Cure
- Coverage
- Approx. 22.5 sq. ft. per bag at 1/4" (2.1 m² at 6 mm), dependent on surface profile, density and porosity
- Cure and recoat
- Pot life / working time approx. 30 minutes; initial set approx. 30-40 minutes (70°F). Light foot traffic: 2 hours; ARDEX CD / CD FINE resurfacing: 4 hours; waterborne sealer (≤ 20 mils): 24 hours. Avoid full and vehicular traffic until the sealer has dried.
- Packaging
- 40 lb (18 kg) bag
From the manufacturer’s published data (source 1, source 2). Always follow the current technical data sheet; ask us for the TDS and SDS.
Watch It Applied

Video coming soon
Mixing and application video for CP Patch. Want to see it in person? It is part of our contractor training.
What Contractors Say About ECM
Ed and his son Matt are phenomenal. The product they sell is top notch and they truly know their craft. Between the great tech help and the great prices this business is the best. I’ve used most coating supply companies in the area over the years and have finally found my forever supplier.
CP Patch Questions
Where can I buy CP Patch near Chicago?
Elite Coatings Midwest stocks ARDEX CP Concrete Patch & Repair Topping at 16410 Kilbourn Ave in Oak Forest, IL, in Chicago’s south suburbs, for pickup. Call 708-629-0825 or request pricing online.
What is CP Patch used for?
Filling spalls, gouges, dormant cracks and birdbaths in existing concrete; Re-forming concrete steps and curbs, and building ramps; Sidewalks, driveways, patios, pool decks, plazas, walkways and parking garages; Not for submerged areas (pools, fountains) or heavy truck traffic.
What is the coverage rate of CP Patch?
Approx. 22.5 sq. ft. per bag at 1/4" (2.1 m² at 6 mm), dependent on surface profile, density and porosity (manufacturer’s figure; actual coverage depends on the surface and how it is applied).
How long does CP Patch take to cure?
Pot life / working time approx. 30 minutes; initial set approx. 30-40 minutes (70°F). Light foot traffic: 2 hours; ARDEX CD / CD FINE resurfacing: 4 hours; waterborne sealer (≤ 20 mils): 24 hours. Avoid full and vehicular traffic until the sealer has dried. (manufacturer’s figures; times vary with temperature and humidity).



